PERANCANGAN FASILITAS KERJA YANG ERGONOMIS PADA STASIUN KERJA FINISHING
Abstract
Abstrak
Para pekerja di stasiun kerja finishing duduk dikursi yang pendek tidak sesuai dengan dimensi tubuh pekerja dan tidak adanya meja sehingga pekerja harus membungkuk untuk mengambil benda kerja serta alas kerja yang diletakkan diatas paha yang mengakibatkan kaki tidak bisa bergerak bebas. Dengan posisi dan sistem kerja tersebut secara langsung menimbulkan rasa tidak nyaman pada pekerja. Untuk mengurangi ketidaknyamanan pekerja pelu dilakukan perancangan ulang fasilitas kerja di stasiun kerja finishing. Perancangan fasilitas kerja baru menggunakan data antropometri para pekerja sehingga dapat diperoleh fasilitas kerja yang ergonomis bagi pekerja. Hasil rancangan diaplikasikan ke pekerja dan berhasil meningkatkan tingkat kenyamanan para pekerja. Sehingga hasil rancangan layak untuk digunakan
Abstract
The workers at the work station finish sitting in short chairs that do not match the worker's body dimensions and there is no table so the worker has to cover up to take the work object and the work mat is placed on the thigh which results in the legs not being able to move freely. With this position and work system, it directly causes discomfort to workers. To reduce worker discomfort, a redesign was carried out, work facilities at the finishing work station. The design of new work facilities uses anthropometric data of workers so that ergonomic work facilities can be obtained for workers. The design results were applied to workers and succeeded in increasing the comfort level of workers. So that the results of the design are feasible to use
Abstrak
Keywords
Full Text:
PDFReferences
Barnes, Ralph M., 1980, Motion and Time Study : Design and Measurement of Work, John Wiley & Sons, New York.
Hakim N, Arman, 2005, Managemen Industri, Andi, Yogyakarta.
Nurmianto, Eko, 1998, Ergonomi : Konsep Dasar dan Aplikasinya, Edisi pertama, Guna Widya, Jakarta.
Purnomo, Hari. 2003, Pengantar Teknik Industri. Graha Ilmu : Yogyakarta.
Santoso S. 2003, Mengolah Data Statistik Secara Profesional, PT. Elex Media Komputindo Kelompok Gramedia, Jakarta.
Suma’mur, 1995, Ergonomi Untuk Peningkatan Produktivitas, Hajimasagung, Jakarta.
Sutalaksana, Anggawisastra, Tjakraatmaja, 1995, Teknik Tata Cara Kerja, Jurusan Teknik Industri, ITB, Bandung.
Tim Laboratorium, Analisis Perancangan Kerja dan Ergonomi (APK dan Ergonomi), Modul Praktikum Teknik Industri, Laboratorium Teknik Industri UAD, 2006
Urich. Karl. T, 2001, Perancangan dan Pengembangan Produk, Edisi Pertama Penerbit Salemba Teknika, Jakarta.
Wignjosoebroto, Sritomo, 2000, Ergonomi, Studi Gerak Dan Waktu : Teknik Analisis untuk Peningkatan Produksi, Guna Widya, Surabaya.
DOI: https://doi.org/10.34001/jsuluh.v6i1.4711
Article Metrics
Abstract view : 333 timesPDF - 487 times
Refbacks
- There are currently no refbacks.
View My Stats
Suluh: Jurnal Seni Desain dan Budaya is lisenced under a Creative Commons Attribution-ShareAlike 4.0 International License.
Currently this Journal is Indexed
by